Laurel-electronics LAUREATE SERIES Serial Comunications Manual de usuario descargar pdf (Pagina 10)

The measurement data format with both of these parameters set consists of 10 characters:

+999.99A<cr><lf>

* * * = optional character

The coded character preceding the carriage return is a letter from A to P. It supplies the alarm,

overload and zero-blanking status of the meter according to the following table:

Alarm Status Zero Blanking No Zero Blanking

No overload Overload No overload Overload

Neither Alarm set A E I M

Alarm 1 set only B F J N

Alarm 2 set only C G K O

Both Alarms set D H L P

For example, a coded character “G” indicates that Alarm 2 only is set, the DPM is in the overload

condition and zero blanking has been selected. This information is useful when the output data is

supplied to a computer for listing and analysis or when it is supplied to a Remote Display in a

Master-Slave configuration.

The Counter and Scale meter are capable of supplying more than 1 measurement value each

reading. In the counter, depending on the selected Function, there can be 1,2 or 3 active

measurement values plus a peak value. The scale meter can transmit net, gross and peak. The

values transmitted are selected by “Ser 3”

These values are sent in a continuous string with no space between them. If Menu item “Ser 3” “Digit

5” = 1, the termination characters of <CR> and optional <LF> appear at the end of each value. If

it = 0 then the termination characters appear only once at the end of the string. In either case, the

coded character, if included, appears at the end of the last value only.

-9-

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 39 40

Sin comentarios

Laurel-electronics LAUREATE SERIES Serial Comunications Manual de usuario Pagina 10