Laurel-electronics LAUREATE SERIES DPM Manual de usuario descargar pdf (Pagina 39)

20. RS-232 AND RS-485 INTERFACE

20. 1 OPERATING MODE MENU SELECTION

The following menu items are accessible only with an RS-232 or RS-485 option installed and

appropriate lockouts enabled. See Section 10 for further information.

MENU KEY

DIGIT SELECT KEY VALUE SELECT KEY

1 2 3 4 5

Press to select value

for flashing digit

3: "0"- Send unfiltered signal

"1"- Send filtered signal

"0" - "6" -300 to 19.2K baud

5: "0"- "9"-60/sec to 1/15min

Press

to display status.

Press

again to select

digit. Selected digit will flash.

Digit 3: Output filtering

Digit 4: Baud rate

Digit 5: Output update rate

Press the

key until SEr

1 (Serial interface setup 1) is

displayed.

1 2 3 4 5

Press the

key until SEr

2 (Serial interface setup 2) is

displayed.

Press to display status.

Press again to select digit.

Digit 2: Line feed

Digit 3: Alarm data sent with

meter readings

Digit 4: Control of output

Digit 5: Meter address

Press to select value

for flashing digit

2: "0"-no line feed

"1"-<LF> after <CR>

3: "0"-no alarm data

"1"-alarm data sent

4: "0"-continuous output

"1"-output on command

5: "1" to "F" & "0." to "F." -

Meter #1 to Meter #31

-37-

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 47 48

Comentarios a estos manuales

Sin comentarios

Laurel-electronics LAUREATE SERIES DPM Manual de usuario Pagina 39

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware Laurel-electronics LAUREATE SERIES DPM