Laurel-electronics LAUREATE SERIES SCALE-WEIGHT METER Manual de usuario Pagina 7

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 43
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 6
7
7. CONNECTOR WIRING INFORMATION
CONNECTORS
Connectors for signal and power are UL-rated
screw-clamp terminal blocks that plug into
mating jacks on the printed circuit board.
Communication connectors are a single RJ11
plug for RS232, dual RJ11 plugs for RS485,
dual RJ45 plugs for RS485 Modbus, or USB.
Warning: Hazardous voltages may be present on pins 4, 5 & 6 of P1 since digital ground is
tied to pin 3 of P5 (-Signal Input). Keep pin 3 close to earth ground to minimize common mode
voltage or shock hazard at pins 4, 5 & 6 of P1.
P4 – SIGNAL INPUT
Excitation voltage can be jumpered for 5, 10 or 24 Vdc (Section 17).
* Control inputs 1 & 2 of P1 are menu
selectable.
Vista de pagina 6
1 2 3 4 5 6 7 8 9 10 11 12 ... 42 43

Comentarios a estos manuales

Sin comentarios